Monmouth CountyHardscape

Bluestone and natural stone patios · Monmouth County, NJ

Bluestone & Natural Stone Patios in Monmouth County, NJ

Short answer

Bluestone is the classic patio stone for Monmouth County homes. Dry-laid bluestone patios typically cost $30 to $45 per square foot installed, and mortar-set bluestone on a concrete slab runs $45 to $65. Mortar-set looks more formal and keeps joints tight, while dry-laid drains better and is simpler to repair.

Concept image: Finished bluestone and natural stone patios at a Monmouth County homeConcept image

Who this is for

  • Traditional and shingle-style homes in Rumson, Fair Haven and Little Silver
  • Formal terraces off a living room or sunroom
  • Pool surrounds with thermal bluestone or travertine
  • Stepping-stone paths and garden walks
Build specMCH-STD
StoneThermal (flamed) or natural cleft, 1.5 in. min. thickness dry-laid
Dry-laid base6 in. compacted aggregate + stone dust or chip bedding
Mortar-set4 in. reinforced concrete slab, setting bed and joints
JointsPolymeric sand (dry-laid) or pointed mortar (wet-laid)
PatternAshlar, square-cut or irregular flagstone
SealingOptional penetrating sealer; not required

Thermal or natural cleft

Thermal bluestone is flamed to a flat, even surface that's comfortable barefoot and reads clean and modern. Natural cleft keeps the stone's ridges and color variation, and looks right next to older homes. Full-color bluestone mixes lilac, rust and green tones; blue-select stays uniform blue-gray.

Dry-laid or mortar-set

Dry-laid stone sits on a compacted base like pavers. It drains well and a single stone can be lifted and reset. Mortar-set stone sits on a concrete slab with mortared joints for a tight, formal look. It costs more and any slab crack can show through, so the slab must be reinforced and jointed correctly.

Other natural stone

Travertine stays cooler underfoot around pools. Granite works for steps and treads. Irregular flagstone suits garden paths. We bring samples to the site visit so you see them against your house.

Concept image: Crew at work on bluestone and natural stone patiosConcept image

What happens after you call

  1. 01

    Site visit

    Measure, talk through dry-laid versus mortar-set, review samples.

  2. 02

    Design + estimate

    Pattern drawing, stone selection, line-item price.

  3. 03

    Base or slab

    Compacted base for dry-laid, or reinforced slab for mortar-set.

  4. 04

    Set stone

    Cut and set each piece to pattern and pitch.

  5. 05

    Joints + clean

    Sand or mortar joints, clean stone, walkthrough.

Concept image: Close-up detail of bluestone and natural stone patiosConcept image

Bluestone + Natural Stone questions we hear on the phone

Does bluestone get hot?

Darker blue-select stone gets warm in direct summer sun. Thermal finish in lighter full-color stays cooler, and travertine is coolest.

Will bluestone flake?

Good-quality bluestone set correctly doesn't. Flaking usually comes from thin stone, poor drainage or rock salt in winter.

Do I need to seal it?

No. Some owners seal for color depth and stain protection, which is a cosmetic choice.