Monmouth CountyHardscape

Driveway pavers · Monmouth County, NJ

Paver Driveway Installation in Monmouth County, NJ

Short answer

A paver driveway costs more than a patio because it carries cars and delivery trucks. Expect $28 to $45 per square foot installed in Monmouth County, built on a 10 to 12 inch compacted base. Done right, it outlasts asphalt by decades and individual pavers can be replaced if one stains or cracks.

Concept image: Finished driveway pavers at a Monmouth County homeConcept image

Who this is for

  • Replacing a cracked asphalt or concrete driveway
  • Circular drives and motor courts on estate properties
  • Paver aprons and borders that dress up an existing driveway
  • Permeable driveways where lot coverage or drainage is tight
Build specMCH-STD
Excavation14 to 16 in. below finished grade
Base10 to 12 in. dense-graded aggregate, compacted in lifts
FabricGeotextile separation over clay or soft subgrade
Paver80 mm vehicular-rated units minimum
EdgeConcrete-backed restraint at all lawn edges
DrainagePitch to the street or a channel drain at the garage

Built for weight, not just looks

A driveway paver has to handle a 6,000 lb SUV turning its wheels in place every day, plus the occasional oil truck or landscaper's trailer. That needs a thicker paver (80 mm or more), a deeper base and a herringbone or 45-degree pattern that locks under load. Patio-grade installs on a driveway shift within a few seasons.

Permeable paver driveways

Permeable pavers let rainwater drain through open joints into a stone reservoir below. On tight shore lots in Spring Lake, Sea Girt and Monmouth Beach, a permeable driveway can help with stormwater and may be treated differently under local lot coverage rules. We confirm what your town allows before you choose.

Street apron and curb cut

Work in the town right-of-way, like the apron or a new curb cut, often needs a separate road opening permit. We file it and schedule around your town's inspection.

Concept image: Crew at work on driveway paversConcept image

What happens after you call

  1. 01

    Site visit

    Measure, check slope to the street and confirm what's underneath.

  2. 02

    Design + estimate

    Layout, pattern, border and a line-item price.

  3. 03

    Permits

    Zoning and any road opening permit for the apron.

  4. 04

    Tear-out + base

    Remove old surface, excavate, fabric, base in compacted lifts.

  5. 05

    Lay + lock

    Lay pattern, cut borders, set restraint, sand and compact the surface.

Concept image: Close-up detail of driveway paversConcept image

Paver Driveways questions we hear on the phone

How long until I can drive on it?

Usually the day the install finishes. There's no curing time like concrete.

Will pavers heave in winter?

Not on a correct base. Heaving comes from water trapped in a thin or uncompacted base, which is why the base gets the most attention.

Can you plow a paver driveway?

Yes. A plow with a rubber or poly cutting edge works fine. Use calcium chloride rather than rock salt where you can.